Proximal Medial Tibia Locking Plate (PROMET)
Lower Extremity
Plates
The ITS. Proximal Medial Tibia Plate is an advanced osteosynthesis system designed for treating various proximal tibia fractures, including complex C1 to C3 fractures when combined with the Proximal Lateral Tibia Plate.
A special feature of this system is the freely selectable hole configuration, which makes it possible to choose locking or non-locking screws for each hole (except compression and oblong holes). With an angle selection of +/- 15°, the system offers particular versatility, especially for complex fractures.
Features
Proximal Medial Tibia Locking Plate (PROMET)
- Multi-directional Locking
- Anatomical plate design
- 5 proximal plate holes for peri-articular fixation
- Oblong hole for optimal positioning and alignment of the tibia length
- Pointed distal plate end for percutaneous insertion
- Pre-angled proximal shaft hole for additional support of the periarticular area
- Locking screw placement parallel to joint to enable a rigid buttress platform
- Plate strength transition from 3.5mm to 2.0mm in the proximal part in order to minimize soft tissue irritation
- Plate lengths: 4, 7-hole
Plate Technology. ONE Technology for all Implants.
All ITS. plates are made from Titanium Grade 2, whereas the screws are made of a harder titanium alloy. This allows the plates to have only non-threaded holes, which all (with the exception of oblong holes) accept both non-locking and locking screws.
