Tubular Locking Plates System (TLS)

Lower Extremity
Plates

The ITS. Tubular Locking Plates System has proven its worth in osteosynthesis of various diaphyseal and metaphyseal fractures.

A special feature of this system is the freely selectable hole configuration, which makes it possible to choose locking or non-locking screws for each hole (except compression and oblong holes). With an angle selection of +/- 15°, the system offers particular versatility, especially for complex fractures.

Features
General
  • Anatomically shaped
  • K-Wire holes for temporary plate fixation
  • 2 plate versions: diaphyseal and distal (multiple points of fixation in the distal area)
  • Axial indentations on the rear side of the plate for accurate fitting on the bone
  • Tapered plate ends for a smooth insertion under the soft tissue
  • Free choice of plate position (lateral, dorsal, ventral)
Distal Tubular Locking Plate
  • Plate lengths distal: 3, 4, 5, 6, 7, 8-hole
  • Plate strength distal: 2.0mm (Schaft), 1.5mm (distal)
Universal Tubular Locking Plate
  • Plate lengths universal: 5, 6, 7, 8, 10-hole
  • Plate strength universal: 2.0mm
Plate Technology. ONE Technology for all Implants. All ITS. plates are made from Titanium Grade 2, whereas the screws are made of a harder titanium alloy. This allows the plates to have only non-threaded holes, which all (with the exception of oblong holes) accept both non-locking and locking screws.
Tubular Locking Plates System (TLS)
Instructions
PDF — 10 MB . EN
30.09.2024